Posts Tagged ‘pakistan’


UPVC and CPVC pipe and fitting
make saudi Arabia
ASTM (American society of Testing Material)

Quality Assurance
AGM high performance extruders with advanced process control and monitoring system permit increased rate of production over entire diameter ranges, adhering to the highest quality.
AGM high technology moulding machines with advanced automated tooling, permit high volume production of fittings with exceptionally high consistency in terms of dimensional accuracy, mechanical strength and surface finish.
At AGM, sophisticated quality control procedures and advanced manufacturing techniques work hand in hand to assure the highest quality and dimensional consistency in thermoplastic piping products.
AGM high technology moulding machines with advanced automated tooling, permit high volume production of fittings with exceptionally high consistency in terms of dimensional accuracy, mechanical strength and surface finish.
Advantages of AGM Pipes
1. Economic
2. Temperature Resistant
3. Durable
4. Flexibility
5. Light Weight
6. Impact Strength
7. Non Toxic
8. Corrosion resistance
9. Easy Installation
SIZES FROM; half inch to 8 inches dimension.
Used in all kind or water supply, irrigation, sprinklers, hot and cold house hold water supply, geezer supply, concealed and exposed fitting, bear all temperature, LED FREE, CHALK FREE PVC, IMPORTED MATERIAL. Also used in air conditioning system, boiler chiller supply and all kind of pressure and non pressure [sdr standard dimension ratio] product ranges.

CALL +92-300-2856741
PP-R Water Pipe and Fittings

Material: Random Polypropylene
Size: full 16mm through 160mm availability
Pressure Rating: 1.25MPa, 1.6MPa, 2.0MPa, 2.5MPa
Standard: ISO15874 and BS 6920
Colors: Light grey or white, pipe for cold water is marked with blue stripes, pipe for hot water is marked with red stripes. Other colors are also available upon request
Form Supplied:
4 and 5.8 meters straight length (all size)
50 and 100 meters coil length (dn16~dn32)
Other forms are also available upon request
Material: Random Polypropylene
Size: full 16mm through 160mm availability
Pressure Rating: 2.5MPa, or other nominal pressures available upon request
Standard: ISO15874
Color: light gray, white or other colors available upon request
Joint: socket fusion joint
 Advantages :
High Temperature Resistance: the maximum sustained working temperature is up to 70℃ , the maximum transient temperature is up to 95℃
Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe
Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium
Corrosion Resistance: resist chemical matters and electron chemical corrosion
High Flow Capacity: smooth interior walls and low friction result in low flow resistance and high volume
Excellent Flexibility: can be supplied in coil
Low Installation Costs: light weight and ease of installation can reduce installation costs
Longevity: more than 50 years under proper use
Recycled and Environment-friendly
Cold and hot water supply
Heating system including flooring heating, wall
heating and radiant system
Central air conditioning system
Industrial liquids transportation
DELIVERY any where in Pakistan

Poly fit solvent joint UPVC SYSTEM

          ASTM D2466  UPVC SCH-40
Fitting Pieces Per Carton Fittings Pieces Per Carton
Elbow 45° 116 Yee   2″ 80
Elbow 45° 60 Yee   3″ 24
Elbow 45° 40 Yee   4″ 16
Elbow 45° 12 Yee   6″ 4
Elbow 90° 80 P. Trap 72
Elbow 90° 48 P. Trap 24
Elbow 90° 32 P. Trap 16
Elbow 90° 15 Cleaning I 270
Elbow 90° 8 Cleaning I 72
Elbow Ma 48 Cleaning I 36
Elbow Ma 32 Cleaning I 12
Plug Elbo 40 End Cap 280
Plug Elbo 26 End Cap 90
Plug Elbo 8 End Cap 48
Tee   2″ 60 End Cap 15
Tee   3″ 33 Off Set 20
Tee   4″ 24 Off Set 24
Tee  5″ 11 Socket 123
Tee   6″ 6 Socket 60
Plug  Tee 27 Socket 66
Plug  Tee 18 Socket 21
Plug  Tee 6 Multi Floo 18
M.F  Tee 24
Reduced Pieces Per Carton Reduced Pieces Per Carton
Elbow    3 78 Socket  3″ 80
Elbow    4 34 Socket  4″ 48
Tee        3 40 Socket   4 48
Tee       4″ 32 Bush     3″ 100
Tee       4″ 24 Bush     4″ 60
Tee       6″ 8 Bush     4″ 60
Yee       4 24 Bush     6″ 15
Yee       4 20
Yee   6″/4 6
 Pipes for both PRESSURE and NON-PRESSURE
[schedue 40] and NON-PRESSURE sizes from 2 inch to 8 inches dimension   
SDR-26, SDR-32.5, SDR-64
In B.S. Standard 3505
CLASS B for 6 bar pressure rating pipes commonly applied and installed for house hold sewer systems.
CLASS C for pressure pipe systems commonly used in pressure water installation and it bears 9 bar pressure.
CLASS D  for pressure pipe systems commonly used in pressure water installation, sprinkler, tube well etc and it bears 15 bar pressure.
CLASS M only used in NON-PRESSUE Installation like house hold sewerage installation or drain water application.
CONTACT +92-300-2856741

A.R. Corporation
complete sanitary house in Pakistan (Islamabad / Rawalpindi city)

A.R. Corporations offers you a wide range of Sanitary Upvc and PPR C pipe and fittings of all Variety product imported , chinees and local brands at your own door. The Details are following:

  • AGM Upvc impoted Saudi arab. For hot & cold water drain sewer and ventilation, from half inch to 8 inches .
  • ACCU-FIT Upvc pakistan made, for sewer, drain, vantilation from 1/2″ to 6″ complete pipe and fittings.
  • RAKtherm PPRC impoted from UAE. 20mm to 110mm complete pipe fittings.
  • F.S. PPRC pakistan made, 20 to 63 complete pipe fittings for hot and cold water supply system of your construction made in Taiwan.
  • WEIJE PPRC impoted from China 20mm to 63mm complete pipe fittings.
  • Water Tanks from 100 Liters to 1000 Ltrs. available with best quality for your water storage purpose.
  • CERAMICS PORTA all accessories imported from (USA).
  • C.P. FITTINGS made in Pakistan.
  • BATH ROOM ACCESSORIES complete range made in Pakistan.

Feel free to call or email to ask our representative at your door.

A.R. Corporation
CONTACT: +92-300-2856741, 0333-3645773, 0342-5557322, 0322-3540656
DHA Sanitary Market Islamabad Pakistan.

Made in Pakistan, available in Galvanized Poles, Stepped Poles, Octagonal conical poles, decorative lighting poles.
Sizes from 114.3×3.65 to 219.1×7.04 mm Dimension and Nominal lengths are manufactured from 4 meters to 13meters in length and more length are made on orders.
Application for any Road side Poles, Gardens lightning, urban area, Bridges lightning,


The purpose of guardrails is to reduce the potential for the severity of accidents involving vehicles that run off the road.
Guardrails and traffic seperators aim at making roads safer for traffice. Protective guardrails can be used on all kind of roads, highways, clearways and mountain roads, as protection against sudden drops or escarpments, bridges, river banks, canals etc.
Thickness: (2.7mm) grade 355 HR coil.
Mechanical Properties:
Yield Strength (kg/mm) : 44-42 kg/mm
Tensile Strngth : 58-76 kg/mm
Elongation % : 35-20
Bend  : OK

CONTACT: +92-300-2856741, 0333-3645773, 0342-5557322, 0322-3540656