RAKtherm pprc
raktherm pprc made in UAE manufacturing in german material
range 20 mm to 110 mm PN 20 and PN 25 PIPES AND FITTINGS
Call : 0322-3540656 , 0300-2856741 , 0333-3645773
Email : arcorporations@gmail.com
visit : http://www.arcorporation.pk
Posts Tagged ‘imported pprc in islamabad’
PPRC RAKtherm
Posted: October 31, 2019 by arcorporations in pprc RAKtherm, UncategorizedTags: beta, green and black layer pprc in pakistan, green pipe, imported pprc, imported pprc in islamabad, plasco pprc, PLASTIC PIPE, plumbing, plumbing pipe, pn 25 impored pprc, PN 25 PPRC, PN 25 WATER SUPPLY, PPR DISTRIBUTOR, PPR ISLAMABAD, PPR KARACHI, pprc manufacturers in pakistan, pprc pipe fitting, pprc quality, raktherm, raktherm pakistan, raktherm pprc, road rail, supplier, valve, water supply plastic pipe
0
RAKtherm type 3 pprc
Posted: March 1, 2019 by arcorporations in type 3 pprc, UncategorizedTags: 110mm imported pprc, 20 mm imported pprc, 75mm imported pprc, 90mm imported pprc, cold water pprc, high pressure type 3 pprc, high resistance pprc, hot water pprc, imported pprc, imported pprc cold water, imported pprc hot water, imported pprc in islamabad, karachi pprc, lahore pprc, pprc 45 dgree elbow, pprc distributor, pprc imported valves, pprc suppliers, raktherm type 3 pprc, type 3 pprc
RAKtherm type 3 pprc
Full name of Polypropylene Random Copolymer, expressed as the PPRC briefly today, is light and smooth, the inner surface is smooth and shiny, scaling and corrosion failure to be hygienic, easy installation advantageous aspects of the plastic pipe industry, such as that taking place inside buildings and cold galvanized pipes hot water systems has been an indispensable solution. Hot and cold water installations inside buildings used for all kinds of PPRC Pipes and Fittings, manufactured using the highest quality raw materials.
PPRC raw materials, heat, pressure and chemicals are divided into three classes in terms of durability. These are: Type-1, Type-2 and Type-3. Type-1 PP-H covering the raw material (polypropylene homopolymer), Type-2, covering the raw material PP-B (polypropylene blockcopolymer), Type-3, covering the raw material PP-R (Polypropylene Randomkopolimer) is . Type-3 raw material, in terms of physical and chemical characteristics of raw materials of Type-1 and Type-2 has a higher performance and better features.
The most important feature of this raw material in plastic pipe industry, its high resistance to heat and chemical attack. This is due to the resistance of PP-R Pipes and Fittings PPRC produced raw material, used successfully in cold and hot water systems. PP-R raw material monomer structure, forms a random chain, under the shelter does not allow any biological substance that produced the raw material of PP-R Pipes and Fittings PPRC segmented color, taste and odor provides outstanding features. When using the appropriate pressure and temperature values, PPRC Pipes and Fittings lifetime can be more than 50 years.
PPRC The Main Features Of The Systems Are As Follows ;
1. 20 ° C and 25 atm pressure, the working life of 50 years.
2. 20 ° C to +95 ° C. Suitable for use. (Taking into account the freezing point of the fluid in the pipe insulation should be applied.)
3. Therefore dayanıklıdır.Bu calcification and rust corrosion.
4. High resistance to chemical agents.
5. The internal surfaces are slippery and shiny.
6. Water color, smell and taste does not change.
7. Thermal and sound insulation.
8. Source parts of the diameter contraction does not occur. This provides the highest performance from the source.
9. Assembly and installation of up to 70% savings there is no wastage.
10. Difficult to catch fire.
11. It is also environmentally friendly.
Call : 0322-3540656 ,0333-3645773 ,0300-2856741
Email : arcorporations@gmail.com
Vist : http://www.arcorporation.pk
Sanitary Plumbing Material in Pakistan 