PVC main hole cover

UPVC Main hole Cover

Available in White and Black Color

Both Pedestrian and heavy duty and weight proof 

SUPPLY ALL OVER PAKISTAN

ISLAMABAD, RAWALPINDI, KARACHI

CONTACT

0300-2856741

contact for meeting or order the web site owner; +92-300-2856741

PVC PROPERTIES

 PVC PROPERTIES

ACCU FIT / polyfit

ACCU FIT PVC PROPERTIES

Properties

Material:

unplasticized polyvinyl chloride (uPVC)

General Properties:

a.Specify gravity1.42 gm / cm³

b.Water absorption4 gm / cm²

c.FlammabiltyWill not support combustion

Thermal Properties:

a.Softening point80 °C

b.Specific heat0.25 cal / °C

c.Thermal conductivity0.13 cal / cm-h-C

d.Coefficient of linear expansion6.7 x 10^{-5 °C}

e.Elongation at break10-50%

Mechanical Properties:

a.Ultimate tensile strength475-525 kfg / cm²

b.Compressive strength670 kgf / cm²

c.Flexural strength950 kgf / cm²

d.Impact stregth4-4.5 joules

e.Modules of elasticity3.2 x 10kgf / cm

Electrical Properties:

a.Volume resistivity10¹⁴ohm / cm

b.Surface resistivity10¹²ohm / cm

c.Power factor (at 10 cycles)3.0

uPVC is a non conductor of electricity and also non subject to galvanic of eletrolytic attack. Electrical equipments should not be earthened to (uPVC) pipes.

Color:

White (other colors are available on request).

contact for meeting or order the web site owner; +92-300-2856741

HYDROSEAL PVC CANADA

HYDROSEAL PVC SCHEDULE 80

0

HYDROSEAL PRODUCTS

SUPPLY ALL OVER PAKISTAN

ISLAMABAD, RAWALPINDI, KARACHI

CONTACT

0300-2856741

PVC Schedule 80

PVC Schedule 40

PVC DIN PN16

PVC BS 4346E

CPVC Schedule 80

CPVC DIN PN16

CPVC ASTM 2846 CTS

SUPPLY ALL OVER PAKISTAN

ISLAMABAD, RAWALPINDI, KARACHI

CONTACT

0300-2856741

contact for meeting or order the web site owner; +92-300-2856741

AGM PVC pipe

AGM PVC

UPVC and CPVC pipe and fitting

make saudi Arabia

ASTM (American society of Testing Material)

Quality Assurance

AGM high performance extruders with advanced process control and monitoring system permit increased rate of production over entire diameter ranges, adhering to the highest quality.

AGM high technology moulding machines with advanced automated tooling, permit high volume production of fittings with exceptionally high consistency in terms of dimensional accuracy, mechanical strength and surface finish.

At AGM, sophisticated quality control procedures and advanced manufacturing techniques work hand in hand to assure the highest quality and dimensional consistency in thermoplastic piping products.

AGM high technology moulding machines with advanced automated tooling, permit high volume production of fittings with exceptionally high consistency in terms of dimensional accuracy, mechanical strength and surface finish.

Advantages of AGM Pipes

1. Economic

2. Temperature Resistant

3. Durable

4. Flexibility

5. Light Weight

6. Impact Strength

7. Non Toxic

8. Corrosion resistance

9. Easy Installation

SIZES FROM; half inch to 8 inches dimension.

APPLICATION

Used in all kind or water supply, irrigation, sprinklers, hot and cold house hold water supply, geezer supply, concealed and exposed fitting, bear all temperature, LED FREE, CHALK FREE PVC, IMPORTED MATERIAL. Also used in air conditioning system, boiler chiller supply and all kind of pressure and non pressure [sdr standard dimension ratio] product ranges.

DELIVERY SPOTS =  EVERY WHERE IN PAKISTAN

CALL +92-300-2856741

LIANSU Chinese PPRc Pipe Fittings

PP-R Water Pipe and Fittings

Material: Random Polypropylene

Size: full 16mm through 160mm availability

Pressure Rating: 1.25MPa, 1.6MPa, 2.0MPa, 2.5MPa

Standard: ISO15874 and BS 6920

Colors: Light grey or white, pipe for cold water is marked with blue stripes, pipe for hot water is marked with red stripes. Other colors are also available upon request

Form Supplied:

4 and 5.8 meters straight length (all size)

50 and 100 meters coil length (d_n16~d_n32)

Other forms are also available upon request

Material: Random Polypropylene

Size: full 16mm through 160mm availability

Pressure Rating: 2.5MPa, or other nominal pressures available upon request

Standard: ISO15874

Color: light gray, white or other colors available upon request

Joint: socket fusion joint

 Advantages :

High Temperature Resistance: the maximum sustained working temperature is up to 70℃ , the maximum transient temperature is up to 95℃

Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe

Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium

Corrosion Resistance: resist chemical matters and electron chemical corrosion

High Flow Capacity: smooth interior walls and low friction result in low flow resistance and high volume

Excellent Flexibility: can be supplied in coil

Low Installation Costs: light weight and ease of installation can reduce installation costs

Longevity: more than 50 years under proper use

Recycled and Environment-friendly

Applications

Cold and hot water supply

Heating system including flooring heating, wall

heating and radiant system

Central air conditioning system

Industrial liquids transportation

DELIVERY any where in Pakistan

CONTACT 

+92-300-2856741

Poly fit UPVC

Poly fit solvent joint UPVC SYSTEM

UPVC FITTING DETAILS

	ASTM D2466  UPVC SCH-40
Fitting	Pieces Per Carton		Fittings	Pieces Per Carton
Elbow 45°	116		Yee   2″	80
Elbow 45°	60		Yee   3″	24
Elbow 45°	40		Yee   4″	16
Elbow 45°	12		Yee   6″	4
Elbow 90°	80		P. Trap	72
Elbow 90°	48		P. Trap	24
Elbow 90°	32		P. Trap	16
Elbow 90°	15		Cleaning I	270
Elbow 90°	8		Cleaning I	72
Elbow Ma	48		Cleaning I	36
Elbow Ma	32		Cleaning I	12
Plug Elbo	40		End Cap	280
Plug Elbo	26		End Cap	90
Plug Elbo	8		End Cap	48
Tee   2″	60		End Cap	15
Tee   3″	33		Off Set	20
Tee   4″	24		Off Set	24
Tee  5″	11		Socket	123
Tee   6″	6		Socket	60
Plug  Tee	27		Socket	66
Plug  Tee	18		Socket	21
Plug  Tee	6		Multi Floo	18
M.F  Tee	24
Reduced	Pieces Per Carton		Reduced	Pieces Per Carton
Elbow    3	78		Socket  3″	80
Elbow    4	34		Socket  4″	48
Tee        3	40		Socket   4	48
Tee       4″	32		Bush     3″	100
Tee       4″	24		Bush     4″	60
Tee       6″	8		Bush     4″	60
Yee       4	24		Bush     6″	15
Yee       4	20
Yee   6″/4	6

 Pipes for both PRESSURE and NON-PRESSURE

[schedue 40] and NON-PRESSURE sizes from 2 inch to 8 inches dimension   

SDR SERIES 

SDR-26, SDR-32.5, SDR-64

In B.S. Standard 3505

CLASS B for 6 bar pressure rating pipes commonly applied and installed for house hold sewer systems.

CLASS C for pressure pipe systems commonly used in pressure water installation and it bears 9 bar pressure.

CLASS D  for pressure pipe systems commonly used in pressure water installation, sprinkler, tube well etc and it bears 15 bar pressure.

CLASS M only used in NON-PRESSUE Installation like house hold sewerage installation or drain water application.

DELIVERY  any where in PAKISTAN

CONTACT +92-300-2856741